Offering the same UHD enhancements as the Loki projector, coupled with a high-capacity 2.37:1 aspect DLP engine.
Offering the same UHD enhancements as the Loki projector, coupled with a high-capacity 2.37:1 aspect DLP engine.
Loki CinemaScope's exceptional design allows a cinemascope film to be shown without requiring an anamorphic lens. The projector also provides Barco’s renowned single-step processing (SSP TM ) and low latency scaling technologies.
Professional grade optics
By basing Loki CinemaScope on a proven optical architecture, custom designed aspherical glass elements and enhanced low dispersion glass lenses, image quality is in a class of its own. Contrast is not only increased, but the details within the darkest parts of the image are more visible.
CinemaScope
Our unique aspect ratio detection system, automatically crops and scales content to fit the appropriate screen area, ranging from 1.78:1 to 2.39:1.
Manual cropping is also available for custom configurations such as cinemascope subtitle support, where only the top black bar is removed from none 1.78:1 content, preserving the subtitles at the foot of the image.
Laser light source
Outstanding image quality requires an exceptional light source, which is why Loki Cinemascope uses our brand-new dual laser engine.
Alongside significantly improved image uniformity, lasers last longer than traditional projector lamps, offer great image quality consistence over their lifetime, are less fragile and offer near instant on/off performance.
Liquid cooling
Loki Cinemascope has departed from a pure fan based cooling system, opting instead for a liquid cooling PID regulation system. This combined with our simulation grade warp engine allows Balder to operate at any angle (free rotation), offering new possibilities when it comes to architectural integration.
产品图片
投影机类型 | Single chip DLP |
技术 | 0.9" DMD™ |
分辨率 | 5,120 x 2,160 (5K UHD) |
宽高比 | 2.37:1 (CinemaScope) |
光源 | Laser phosphor |
光源使用期限 | 20,000 -60,000 hours Laser intensity dependent |
光输出 | DCI (P3) Color Wheel: Up to 5,100 ANSI lumens T Color Wheel: Up to 6,500 ANSI lumens M Color Wheel: Up to 7,800 ANSI lumens |
CLO(稳定光输出) | Yes |
对比度 | 1,800:1 Sequential 450:1 ANSI |
亮度均匀性 | >90% |
透镜范围 | (R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation) (R9801832) - FLDX UST (0.41:1) - 90° Lens (R9802244) - EN67 (0.65:1) (R9802243) - EN66 (0.80 -1.21:1) (R9802003) - EN76 (0.95 -1.30:1) (R9802242) - EN63 (1.20 -1.70:1) * (R9802241) - EN61 (1.70 -2.50:1) * (R9801211) - EN44 (2.50 -4.60:1) * Standard Lens Option(s) |
光学镜片移动 | Up to 122% vertical lens shift & up to 40% horizontal lens shift (depending on lens selection) Visit the Barco Residential Lens Calculator for further information Download Lens & Airflow Data Here |
挡光板 | Yes |
色彩纠正 | P7 RealColor™ |
色阶度 | DCI (P3) Color Wheel: DCI P3 T Color Wheel: REC.709 M Color Wheel: REC.709 |
图像处理 | Embedded Warp & Blend Engine |
WARP | 4-Corner Warp & Bow Correction via Warp Engine |
安装角度 | 360° Rotation |
网络连接 | 10/100 Ethernet via RJ45 connection |
集成网络服务器 | Yes |
诊断 | via Prospector web interface |
HDR | HDR10 |
3D | Active Stereoscopic 3D Additional hardware required please contact an authorized Barco representative for details |
输入 | 1 x HDMI 2.0 (HDCP2.2) 1 x HDBaseT (HDCP1.4 - 9Gbps only) 2 x Dual Link DVI-D 2 x Display Port (1.2) 12G-SDI 1 x RJ45 Ethernet 1 x RS232 1 x Remote Control (RC) 3 x USB (2 x Rear, 1 x Front) DMX (1 x Input, 1 x Output) |
输入分辨率 | From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz or up to 2,560 x 1,600 @ 120Hz |
延迟 | TBD |
控制 | IR, RS232, IP, 12v Trigger Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them. Download our integration guide for more information. |
电力要求 | 100 - 240V / 50 - 60Hz US Requires: 20A Service (NEMA 5-20P Plug Type |
功率消耗 | 2180 W - Maximum |
每小时BTU | Max. 6,000 BTU/h |
待机功耗 | Standby ECO Mode: 110v - 0.78W (with LAN Connection) 230v - 0.87W (with LAN Connection) |
噪音级别(典型,25°C/77°F时) | 38 dB(A) |
工作温度 | 10 to 45 °C at Sea Level Optimal Set Point: 20 °C |
工作湿度 | 20 to 80% (relative humidity) |
气流要求 | Air Inlet (from Rear w/Feet Down): Right Side Exhaust (from Rear w/Feet Down): Rear Clearance Requirements: Front: 1cm Left: 1cm Right: 50cm Rear: 100cm Top: 1cm |
排风量 | 193 ft 3 /min @ 25 °C 327 m 3 /hour @ 25 °C Download Lens & Airflow Data Here |
尺寸(宽x长x高) | Excluding Lens 577 x 738 x 304 mm 22.7 x 29.1 x 12 in. |
净重 | Excluding Lens 44.5 kg / 98.1 lbs |
装运尺寸 | Excluding Lens 720 x 910 x 630 mm 28.4 x 35.8 x 24.8 in. |
毛重 | Excluding Lens 55kg / 121.3 lbs |
存储温度 | -20 to 60 °C |
存储湿度 | 10 to 90% (relative humidity) |
标准配件 | Power Cord, Remote Control |
24/7 operation | This projector is designed and warranted for heavy duty 24/7 operation. Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications. |
认证 | CE, FCC Class A and cCSAus |
安全要求 | This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 3.15 is installed. For Northern America, installation requirements according to Risk group 3 (RG3) must be followed when interchangeable lens with throw ratio greater than 2.33 is installed. Refer to the installation manual for further information. |
保修期 | Limited 3 years parts and labor Extendable up to 5 years |
* | Firmware upgradable Please contact an authorized Barco representative for details |
镜头
FLDX 0.8-1.21:1 (EN66) 短对焦
FLDX 0.8-1.21:1 (EN66) 短对焦
WUXGA 0.75 - 1.13 :1 WQXGA/4K 0.80 - 1.21 :1 F80:1.12 - 1.70 :1(WQXGA/4K UHD)(F80需要镜头适配器R9801442)
FLDX 0.61 : 1 (EN67)
FLDX 0.61 : 1 (EN67)
聚焦范围:0.5-4.0 m<br> 投射比<br><br>WUXGA 0.57:1<br> WQXGA/4K 0.61:1<br> F80: 0.85:1 (WQXGA/4K UHD)<br>(F80 需要使用镜头适配器 R9801442)
FLDX 1.2 - 1.7:1 (EN63)
FLDX 1.2 - 1.7:1 (EN63)
WUXGA 1.12-1.58:1 WQXGA /4K 1.20-1.70:1 F80:1.59-2.24:1 (WQXGA/4K UHD)(F80 需要 FLD/FLD + 镜头适配器)
FLDX 1.7-2.5:1 (EN61)
FLDX 1.7-2.5:1 (EN61)
WUXGA 1.58-2.33:1 WQXGA/4K 1.70-2.50:1 F80:2.38 - 3.51 :1(WQXGA/4K UHD)(F80需要镜头适配器R9801442)
FLDX 镜头 0.38:1 UST 90°
FLDX 镜头 0.38:1 UST 90°
UST-LENS SUPPORT FOR 90° F-SERIES LENS
UST-LENS SUPPORT FOR 90° F-SERIES LENS
超短距离投射镜头FLD+ 0.28:1(EN68)
超短距离投射镜头FLD+ 0.28:1(EN68)
F35/F70/F90:0.28 :1(1080/WUXGA) 0.30 :1(WQXGA/4K UHD)
北京市朝阳区太阳宫中路12号冠城大厦12层
(联系就说在DAV音视工程网上看到的)
010-80101166
巴可BARCO是全球显示行业领先的技术公司,主要为娱乐、企业和医疗保健市场设计开发网络可视化和创新协作解决方案。巴可伟视(北京)电子有限公司为中国市场专业市场设计开发可视化解决方案:涉及控制室、国防与航天、数字影院、医疗保健、媒体与娱乐、模拟与虚拟现实。巴可BARCO产品包括专业工程投影机、数字影院投影机、仿真投影机、显示器、监视器、LED显示屏、DLP拼接显示单元、LCD视频墙、视频墙控制器等。